From idea to object, layer by layer.
Objects are scanned into accurate 3D models, new parts are designed, and finished pieces are printed ready for use. A broken part, a prototype or a small batch – describe what you need.
How it works
Order a single step or the whole service, from scan to finished part.
-
3D scanning
The shape of the object is captured with a 3D scanner. Useful for parts that have no drawings, and for documenting objects.
-
3D modelling
A scan is turned into a usable model, or the part is designed from scratch based on measurements, a sketch or a photo. The model is also available as a file (STL, STEP or OBJ) on request.
-
3D printing
The part is printed on an FDM printer in a material suited to its use, whether it's a one-off or a small batch.
Materials
The material is chosen based on what the part will be used for. Not sure which one fits? Mention in your message where the part will be used.
| Material | Properties | Heat resistance | Typical uses |
|---|---|---|---|
| PLA | Rigid, dimensionally accurate and affordable. Not suitable for hot environments or long-term loads. | approx. 55 °C | Prototypes, scale models and decorative items |
| PETG | Tougher than PLA. Resists moisture and many chemicals. | approx. 70 °C | Functional parts, brackets and enclosures |
| ASA | Resists UV light and weather, so it's suitable for outdoor use. | approx. 90–100 °C | Outdoor parts and vehicle parts |
| TPU | Flexible and rubber-like. Withstands impact and wear. | approx. 90 °C | Seals, dampers and protective cases |
| PA (nylon) | Very tough and wear-resistant, with low friction. | approx. 85 °C | Gears, hinges, and sliding or wearing parts |
| PC | Very strong and impact-resistant. Handles heat well. | approx. 115–125 °C | Heat- and impact-resistant parts and enclosures |
Carbon-fibre reinforced versions (PLA-CF, PETG-CF, ASA-CF, PA-CF and PC-CF) and other special filaments, such as ferrite-powder-filled and fluorescent filaments, are also available.
Heat resistance is an approximate heat deflection temperature (HDT, 0.45 MPa), and values vary between manufacturers. A printed part may soften at a lower temperature.
Price estimate
A rough price for printing. The estimate can be calculated from the part's dimensions, or from an STL file for a more accurate result.
Estimated price
–
Enter the dimensions or choose a file.
The estimate covers the start fee, handling, material and print time. Modelling, scanning, finishing and delivery are priced separately. Several small parts may have to be split into multiple print runs to ensure quality. The final price is confirmed in a quote.
Request an exact quoteGallery
A selection of scans, models and prints.
-
A rendered view of MtG marker coins.
-
A container for the marker coins. Attaches via TPU rails to the side of the deckbox.
-
A Deck box for up to 100 dual-sleeved 63mm x 88mm sized cards. With commander name window and side rails for side deck/marker box / cards.
-
A lid for the deck box. Consists of flexible TPU plastic and hard PLA+. Curves over the box. Available with engraving and holoeffect.
From the workshop
Works in progress, experiments and prototypes: how objects take shape step by step.
No posts yet.
Get in touch
Describe briefly what you need. Messages are usually answered within one business day.
- etiainen3d@protonmail.com
- Phone
- +358 40 1744 855
- Business ID
- 3582145-8